All product categories
Aluminum Products
Markets
Aluminum Alloy
- Address:East Road, Zhengzhou City
- Sales Hotline:
- Manager Zhao :15638290022
- Service :0371-63382659
- Fax :0371-56500620
- Mailbox :dannaalu@gmail.com
Contact us
E-mail:info@changyuan-al.com   Hotline:+86-371-63382659
HENAN CHANGYUAN ALUMINUM INDUSTRY CO., LTD
Contact us
1100 Mill finish aluminum coil dscription
1100 aluminum alloy for industrial pure aluminum, aluminum content (quality score) is 99.00% .1100 aluminum alloy is Non - heat treatment reinforcement. High corrosion resistance,
Electrical conductivity and thermal conductivity, its density is small, plastic good, can produce various kinds of aluminum through pressure processing, but the intensity is low. Other processes
Basic performance as same as 1050 A aluminum alloy.
1100 aluminum alloy is generally used for good forming process, high corrosion resistance, but not need High strength. Such as aluminum veneer, aluminum curtain wall board, various spray aluminum sheet, single hyperbolic aluminum plate, chemical transportation and storage equipment, plate Metalworking products, hardware fittings, welding combination key, reflector, nameplate, transportation facilities signs, etc
Changyuan Aluminum can supply the 1100 H14,1100 H16,1100 H18,1100 H24,1100 H26,1100 O mill finish aluminum coil, the thickness is from 0.2mm to 6.0mm,the width is from 600mm to 2600mm,the mother coil is including the direct chill cast (DC) and continuous cast(CC).
1100 mill finish aluminum coil chemical composition
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Other |
Al |
0.95 |
0.05-0.2 |
0.05 |
- |
- |
- |
0.1 |
- |
0.15 |
99.00 |
Standard:GB/T 3190-2008,EN 573-3,ASTM B 209
1100 aluminum alloy Mechanical properties
Standard:GB/T 3880-2006,EN 485-2,ASTM B 209
Temper |
Thickness(mm) |
Tensile strength(Mpa) |
Yield strength (Mpa) |
Elongation min (%) |
O(Soft)/
|
0.2-0.5 |
75-105 |
25 |
15 |
0.5-1.5 |
17 |
|||
1.5-3.0 |
22 |
|||
3.0-6.0 |
30 |
|||
6.0-12.5 |
28 |
|||
12.5-50 |
|
|||
H 12/H 22 |
0.2-0.5 |
95-130 |
75 |
3 |
0.5-1.5 |
5 |
|||
1.5-3.0 |
8 |
|||
3.0-6.0 |
8 |
|||
H 14/H 24 |
0.2-0.5 |
110-145 |
95 |
1 |
0.5-1.5 |
2 |
|||
1.5-3.0 |
3 |
|||
3.0-6.0 |
5 |
|||
H 16/ H 26 |
0.2-0.3 |
130-165 |
115 |
1 |
0.3-0.5 |
2 |
|||
0.5-1.5 |
3 |
|||
1.5-4.0 |
4 |
|||
H 18 |
0.2-0.5 |
150 |
- |
1 |
0.5-1.5 |
2 |
|||
1.5-4.0 |
4 |
|||
H 112 |
6.0-12.5 |
90 |
50 |
9 |
12.5-40 |
85 |
40 |
- |
|
40-80 |
80 |
30 |
- |
1100 mill finish aluminum coil Performance advantage
1.1100 mill finish aluminum coil has high corrosion resistance,thermal conductivity small density,good plasticity,and can be processed into various shapes of aluminum products.
2.1100 mill finish aluminum coil is low strength,but it has the good ductility,formability and weldability.
3.After anoditizing,the corrosion resistance of 1100 mill finish aluminum coil can be further improved and the surface quality of 1100 mill finish aluminum coil will be improved.
4.At present, all the large architectural walls in the world are made of the wall panels of the product, which are widely used in airport, railway station and all the exterior walls of high-rise buildings.